compatible exhaust?


4 replies to this topic
  • Stroker06

Posted August 25, 2009 - 07:08 PM

#1

Hey guys, this last weekend I looped out and bent the exhaust can on my 2007. I had just installed a PMB end cap and now am bummed.:ride:
After searching I was not able to find out what year exhaust can will fit my 07 head pipe.
Should I just locate another stock 07 unit, or switch to an aftermarket one?
I am not looking for more power, but must have a spark arrestor.
Thanks for the help.

  • cowboyona426

Posted August 26, 2009 - 07:08 AM

#2

I don't think the 06 can will fit... IIRC they changed the header diameter or something. Any can from an 07-09 should work. But... why not sell the PMB to recoup some of the cost and get an aftermarket slip-on or full exhaust? My 06 is wearing a Dr. D exhaust and it made the already great power delivery even better by broadening it out a bit and adding a bit to the low end.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 26, 2009 - 08:03 AM

#3

And for and extra $15 or so, you can have the DRD with a USFS sparky (removable) in place.

The only pipe that will fit your header AND your PMB is the '07.

  • anthony250

Posted August 26, 2009 - 02:48 PM

#4

I don't think the 06 can will fit... IIRC they changed the header diameter or something. Any can from an 07-09 should work. But... why not sell the PMB to recoup some of the cost and get an aftermarket slip-on or full exhaust? My 06 is wearing a Dr. D exhaust and it made the already great power delivery even better by broadening it out a bit and adding a bit to the low end.


1+ plus on this idea, a slip on wont give you loads of power , just maybe a slight diffent sound , tone , maybe a harder snap or something , and look lots better , Maybe a DR.D or Pro Circuit

  • Stroker06

Posted August 26, 2009 - 05:09 PM

#5

Thanks for the replies.:ride: I am just trying to save money, by getting a take off, but if my PMB will only fit the 07 can then it may be difficult to find one or for that matter sell the PMB.
I will do some research on different exhausts and let you know what I come up with.
Thanks again.:)





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.