Big Bore and gytr head question

5 replies to this topic
  • yz133rider

Posted August 09, 2009 - 07:28 PM


Two separate questions first,

Any experience with cylinder works kits on here? I havent seen anything about them on here. I have seen them as cheap as 394 on ebay. That seems pretty low. Seems hard to pass up on as I am planning on putting a piston in which means it'd need a gasket set anyway so now were up to almost 200 just for a fresh piston. Any opinions?

Next the gytr head that just came out is that quad only? If not what years does it fit and any way to make it fit the older bikes?

Thanks alot, Matt.

  • yz133rider

Posted August 12, 2009 - 03:02 PM


ALright well i did some research on the big bore and im probably going to do it. The head issue is another story I have no clue if its possible or what I'd have to change to make it work. Any help out there?

  • FinchFan194

Posted August 12, 2009 - 04:03 PM


I too am considering the big bore kit from those guys on Ebay if you do it let me know how it turns out.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • xr88honda

Posted August 12, 2009 - 04:06 PM


athena is junk cylinder works is a better part def do the cw kit

  • rjcook450

Posted August 12, 2009 - 04:57 PM


the gytr head can be used on the 08,09 450f. james stewart runs it

  • KJ790

Posted August 12, 2009 - 05:24 PM


The head can only be used on an 06-09 YZ450F, the previous years used a different head design.

Related Content


Help with 2000 yz426 by weekend woods racer

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  36 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.