Need A Answer Fast!!!

3 replies to this topic
  • gordster1122

Posted August 07, 2009 - 09:34 AM


i have my 426 almost apart and i cant get the swingarm bolt out so i can get the engine out and someone on here said use a brass punch will these because i want to get it apart so i can get the frame powdercoated and put back together http://www.princessa...yword=punch set

  • gordster1122

Posted August 07, 2009 - 10:30 AM


k got it out now my other question is near the bottom where it is bolted to the frame i try and its on so tight would it be better just to use a impact gun to take it off and the where the engine bolts on 2 on the bottom can i use a impact to get the bolt out of there 2?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • matt4x4

Posted August 07, 2009 - 10:44 AM


yes you can - and even if you break the bolts, you can just replace them. Tried heat and penetrating oil on the threads yet?

  • gordster1122

Posted August 08, 2009 - 04:58 AM


no i havent i was trying to take the bottom bolt out and heard a crack think i broke it how would i get it out now and where can i get new bolts for them ?
i was looking on

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.