Cheap AIS removal kit

4 replies to this topic
  • diegox450

Posted August 04, 2009 - 10:47 AM


Here in Argentina it's almost impossible to buy an AIS removal kit for my WR, so
I used a medium allen bolt, some safety wire and soldering to make my own kit.

Tell me what you think about it...

After rejetting the nasty popping sound dissapeared and the bike runs smoother...

Posted Image

Posted Image

  • stev0

Posted August 08, 2009 - 01:05 PM


Good job, but you could also have sealed the rubber pipes with a bolt or 2 ....

but yes looks good if you are going for the cleaned out look.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ASternad

Posted August 08, 2009 - 03:22 PM


Regarding Stevho comment.
If you plug the rubber hoses with a bolt or ball bearing is there any adverse effect to the AIS pump or other parts?

  • stev0

Posted August 08, 2009 - 10:30 PM


You will need to plug the airbox aswell as the other 2 pipes at the engine.

Then you can remove the whole pump.

My bike ran richer when I removed it ... it sounded richer??!?

  • diegox450

Posted August 09, 2009 - 02:06 PM


Yes, it runs a little richer now, but we are in winter season so it's perfect!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.