Eaiser clutch pull?


1 reply to this topic
  • rmx250rider

Posted July 30, 2009 - 06:10 PM

#1

I read on Thumperfaq.com that you can lengthen the clutch arm on a 426...
my question is, can this same mod be done to a 400?

it has on there that the 400 is 5mm longer than the 250F
so can I lengthen my 400's 5mm?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • matt4x4

Posted July 31, 2009 - 04:35 AM

#2

Most things on the 400 are the same as the 426 - yes - you can lengthen it.
Another way to lighten the pull is to replace the lever with one that has the hole for the cable end lower and back some (or drill a new hole in your existing lever). Someone did a writeup on it.





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.