http://cgi.ebay.com/...sQ5fAccessories

Are they like Hotcams stage 1 or like the stage 2???
Should I just stay with the hotcams I plan on getting soon? Stage 1 that is.

I think they are the same ones I'm using? If so I like mine so far, but have not yet finished tuning my carb and have not yet had time to profile them or begun tuning them. As of now mine are still set to the install timing card lobe centers. Over all there a good choice, but as MR. Sisneros has said "just because their yosh dont expect miracles from them.

From the FAQ page. S/SM IN .334 lift 227 dur EX .323 lift 243 dur


E IN .351 lift 227 dur EX .366 lift 243 dur


yosh IN .354 lift 236 dur EX .366 lift 242 dur


HC stage 1 (new) IN .358 lift 238 dur EX .358 lift 238 dur


HC stage 2 (was stage 1) IN .377 lift 243 dur EX .377 lift 243 dur


RHC 187 IN .356 lift 277 dur EX .356 lift 277 dur. 229$ for a set of HC st1 here http://cgi.ebay.com/...sQ5fAccessories I got my set from them.

I would stay with the Hot Cams. Unless your going to the full SM 470 setup, then RHC cams etc...

Remember, most people/owners never take the time to keep trying various timing combo's. They just set them or have someone set them, run them out of the box, or at times set them wrong. The cams dont get tuned for the individuals needs or the needs of the existing host engine/carb. This doesn't give any cam grind a fare shake, but anything is better than stock in our case.

Those ones are listed for the LTZ400. I know it's the same motor but Fi'd. Are those the right cams for the DRZ?

Thanks for chiming in Mr. SSW. That sounds like a pretty good deal.

What additional mods are recommended to step up to Hotcams Stage 2 versus Stage 1?

They don't make Hotcams Stage 2 any more. They kept breaking things.

IRON MAIDEN said:

They dont know what they are selling. You be surprised how much that is listed as Ltz,Kfx and Dvx400 only! on Ebay. I bought my CW 434 kit listed as a Kfx-Dvx quad kit on ebay.