Jetting Gurus

No replies to this topic
  • Dan426

Posted September 15, 2002 - 05:12 PM


Hey Fellas,

Bike 02 WR426
Pipe White Bros Pro Meg E-Series on 6 discs
twin airfilter, iriduim spark plug, pretty much stock mechanicly.
current jetting is 2.5 turns out on the pilot/air screw, needle down one clip (richer) the rest standard. Bike doesnt run quite spot on ever since the pipe was put on, misses in midrange, coughs splutters a bit, top end is perfect.
does anyone else run this pipe and have jetting specs that work? i ride at sea level to 500 metres above
Thanks heaps guys


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.