RC Collar Accelerator Pump mod



2 replies to this topic
  • CuLayTur

Posted March 20, 2003 - 10:32 AM

#1

I've installed the 3/32" RC collar on my accelerator pump rod and have a question if somebody has done the same mod. I have set the collar height using a .024" feeler guage and can get the initial fuel squirt down pretty low, but after a few pumps, the fuel just shut's off. I have the tank connected to the carb and there is plenty of fuel in the bowl. It seems like after a few tries, the AC pump bowl doesn't refill.. Any ideas?


CThanks,
curt

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • CuLayTur

Posted March 20, 2003 - 12:10 PM

#2

Never mind... I found a small clog in the intake port from the main bowl to the APJ...

Curt

  • x2smoker

Posted March 20, 2003 - 04:01 PM

#3

Hey, nothing wrong with thinking out loud! :)

x2




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.