knocking sound


No replies to this topic
  • rogo

Posted June 16, 2009 - 05:01 PM

#1

:thumbsup: I'm sure you've heard it before but there is a knocking sound coming from the engine of my 2000 WR400. I am not overly good mechanically but i like to try and learn.

Using the manual i checked the clearances and assuming i did it right they are within spec. It said to put the line in the centre of the inspection hole which would be top dead centre. The only markings i could find where "H I" so i lined up the 'I' and checked the gaps. Is this correct or have i got no idea?

If it is correct what else could the sound becoming from?

Cheers Dan




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.