Clutch question (yzf450 '08)

No replies to this topic
  • Lorre79

Posted June 08, 2009 - 12:45 PM


I thought my clutch was dead after 30hours...

But I measured the friction plates and they were still good (+-2.98mm)
I measured the springs under the limit, +-48.70mm were the limit is 49.00mm.

Do i better replace them both, or just the springs?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.