yz400f setup


2 replies to this topic
  • rmx250rider

Posted June 06, 2009 - 12:32 PM

#1

I messured it out at 24 inches and 3/8th

when im in gear and sittin on it its 21" even

what does that messure out to in mm?

and what do I have to do to get it set to the 100mm-105mm range?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 06, 2009 - 01:39 PM

#2

MM = inches X 25.4

Your current sag is 24.375-21=3.375" ( 3 3/8")

3.375x25.4=85.8mm

100mm/25.4=3.94", or roughly 3 15/16"

  • rmx250rider

Posted June 06, 2009 - 01:55 PM

#3

what do I do to get it right?

turn the clickers, adjust the rear spring which way? tighten or loosen?





Related Content

Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.