2000 YZ426 Clutch parts question

3 replies to this topic
  • MaDgamEr

Posted June 02, 2009 - 03:51 AM


Hey guys, just getting ready to order the parts from TT store to do the 01 mod on my 2000 since the clutch has become extremely grabby on start and shifting from neutral and have a couple questions.

Since the fingers on my basket are quite grooved, can I just replace the entire hub assembly off an 01-02 or is it different from an 00?

Also, after the mod, I'd be using an o1-02 rebuild kit (for an aftermarket, friction, steel, springs, etc) as opposed to 00, correct?

Thanks guys.

  • grayracer513

Posted June 02, 2009 - 10:05 AM


The "baskets" have different part numbers due to differences in the cushion units at the center of the driven gear assembly, but should be interchangeable. Using a later one will also allow you to use an aftermarket basket if you ever decided to do that; baskets for the 2000 are hard top find.

The boss (center hub) is interchangeable as well.

If you are rebuilding the entire clutch then yes, just use the '01-'02 parts as if the bike was one.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MaDgamEr

Posted June 02, 2009 - 07:01 PM


Awesome, thanks for the info Gray!
Had a look at my clutch today, hub and boss look to be in pretty good shape, actually way too good a shape for how horrid the clutch feels!

So I think I'll just do the 01+ plates (etc) for now... and if its still grabby, I'll do the 01+ boss and hub.

  • grayracer513

Posted June 02, 2009 - 07:35 PM


hub and boss look to be in pretty good shape,

The hub and the boss are two names for the same part. The basket (which I thought you said was grooved badly) is riveted to the primary driven gear assembly.

Related Content


Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.