YZ Throttle Stop Part Number
4 replies to this topic
Posted April 01, 2003 - 02:02 PM
Or for those of us who like to hang on to our money you can go to the hardware store and get a 1" 5mm allen-head screw and cut it to length. Total cost: $0.50 at most. No need to blow $10-15 at a dealer. If this level of work is over anyones head they shouldn't be riding dirt bikes.
Posted April 01, 2003 - 08:52 PM
Not that this is a tough mod to do but when you weigh your time against $10, there is a trade-off. I've built computers, houses, fixed cars, motorcycles, etc. But I make $10 in 15 minutes at my job. With 2 babies, my time is much more important than the cost of a quick swap and a trip to a hardware store when the dealer is a couple blocks away.