Blue to Grey PMB


13 replies to this topic
  • davcon

Posted May 30, 2009 - 07:08 AM

#1

These two PMB's were purchased around Christmas 2008. On the left is my son's on his 08yz250. We ride in the same terrain so soil staining is ruled out. I emailed PMB to see what they say. Comments?

Posted Image

  • 183080922

Posted May 30, 2009 - 07:52 AM

#2

huh i dont know what to tell ya did you use anything bersides water or soap to clean it?

  • davcon

Posted May 30, 2009 - 07:56 AM

#3

huh i dont know what to tell ya did you use anything bersides water or soap to clean it?


Same thing my son uses. Dish soap.

  • spc mike

Posted May 30, 2009 - 08:01 AM

#4

The anodizing wanst applied right most likely. PMB should replace it for you though.

  • 183080922

Posted May 30, 2009 - 08:02 AM

#5

ya id try to see if pmb would replace it

  • grayracer513

Posted May 30, 2009 - 09:56 AM

#6

Heat.

  • Stroker06

Posted May 30, 2009 - 12:50 PM

#7

This is just another reason I went with a black PMB endcap. Black matches any color on the bike and I can fix it with wood stove paint if the anodizing ever goes bad on mine.
However, you did the right thing by contacting PMB and they will probably help you out. Good luck.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sloz71

Posted May 30, 2009 - 03:52 PM

#8

Promoto Billet is a great company. They are located in Nampa Idaho a short distance from where I live in Meridian. Just give them a call and they will make it right. I have talked to them numerous times on the phone and they are great.

  • finthat

Posted May 30, 2009 - 06:22 PM

#9

It looks like it got hot to me. There is still blue left on the bottom, heat rises?? Who knows, can anodizing burn off??

  • tribalbc

Posted May 30, 2009 - 08:24 PM

#10

Mines the same. I figured it was either acidic or alkaline mud or heat.
I emailed PMB and they told me it was probably the soap I used to clean it but I clean my bike with strictly water and a rag.
I know, it's probably not the cleanest bike in the world :crazy:

  • davcon

Posted July 15, 2009 - 08:45 PM

#11

Got busy and just got around to calling them last thursday. Those guys were great! They sent out a new blue endcap which arrived today. Got my fingers crossed that it'll stay blue.

  • sean3239

Posted July 15, 2009 - 09:23 PM

#12

missed the sealant step?

  • davcon

Posted July 16, 2009 - 05:34 AM

#13

missed the sealant step?


What sealent step? If you mean red RTV between the base and the silencer, that was done.

  • Sancho184

Posted August 13, 2009 - 08:36 PM

#14

So you didn't put any alex plus bright white on it to seal it? :thumbsup:





Related Content

Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.