WR 400 CDI



3 replies to this topic
  • Roger_H

Posted August 30, 2002 - 06:50 AM

#1

Does anyone know if a YZ 400 or YZ 426 CDI box will work on my 98 WR 400? I just replaced the stator to the tune of $180 and am still fouling plugs like crazy. I sure would like to try someones CDI box before I take another $200 gamble. THere are a couple of WZ's around but no WR's. I disconnected the blue wire...no change. Cleaned the carb, filter, checked everything that I could think of and took most of the suggestions posted here. Seriously considering going red! Any help is appreciated.

  • lewichris

Posted August 30, 2002 - 07:30 AM

#2

it is all in the jetting

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MN_Kevin

Posted August 30, 2002 - 08:04 AM

#3

Have you re-jetted at all?

Have you modified your Accelerator Pump yet?

You really need to do both. The 98 had the worst jetting, and every year it has gotten a little better.

  • Roger_H

Posted August 30, 2002 - 10:07 AM

#4

Thanks for the replys. I have done no jetting or rejetting. The bike is stock except for the YZ muffler that I installed when it was new. It ran perfect for 3+ years and all of a sudden started this plug fouling thing.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.