has anybody had any experience doing the power now mod on 2 strokes? can you experience similiar results as is being reported on the four strokes? my 250f is in a million pieces i'm waiting for rod bearing ,2cnd gear, left crank half, and some bearings etc. should have traded up my kids bikes are a yz80 and yz125 so i was wondering if the power now mod would benefit those bikes? thanks for the info
powernow mod
Started by yar250f, Mar 03 2003 06:10 PM
2 replies to this topic
Posted 03 March 2003 - 06:10 PM
has anybody had any experience doing the power now mod on 2 strokes? can you experience similiar results as is being reported on the four strokes? my 250f is in a million pieces i'm waiting for rod bearing ,2cnd gear, left crank half, and some bearings etc. should have traded up my kids bikes are a yz80 and yz125 so i was wondering if the power now mod would benefit those bikes? thanks for the info
Posted 03 March 2003 - 11:17 PM
I think you may see some sort of improvement... but then a YZ80 or 125 is not known for it's bottom end lugging power characteristics anyway... you may get a bit of power, but you may not notice it, because the rest of the bike is designed for keeping it in the powerband... the JamesNOW will not significantly broaden the powerband on those bikes... changing the reeds and a different pipe will make far more difference...
It may throw your low-end jetting out the window though, I have no direct experience...
HTH,
David
It may throw your low-end jetting out the window though, I have no direct experience...
HTH,
David
