Stock YZ needle problems


No replies to this topic
  • TWILES

Posted April 13, 2009 - 01:39 PM

#1

Has anyone had a problem with the stock 05 YZ needle being too lean in a 2005ish model WR? I bought the stock 05 YZ needle for my 2005 WR a while back. I cleaned the carb well and I now have the needle one notch from the last and its still a little too lean. The inside AND outside of the carb and all parts in the carb(ACV and AP parts) are spotless. The jetting should be dead-on and I've got the leak jet plugged. It still has a little miss at the first part of the needle circuit. Not all the time but when it does it sucks. Help me.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.