JD jetting kit


2 replies to this topic
  • wartsnuff

Posted April 12, 2009 - 06:20 PM

#1

Hey Guys,

well this holiday weekend i decied to take the carb off my 08 WR450...

it wasn't as hard as i thought it was going to be.

put the 24 pilot jet in.

168 main with the red needle in the stock 4th position.

too cold and wet yet to ride up here in winnipeg. but the bike started right away..

and went around the block and the bike seems great... whoo hooo

cheers
Warts

P.S thanks JD jetting. for the formula!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Charles De Mar

Posted April 12, 2009 - 06:21 PM

#2

Hey Guys,

well this holiday weekend i decied to take the carb off my 08 WR450...

it wasn't as hard as i thought it was going to be.

put the biggest pilot jet

168 main with the red needle in the stock position.

too cold and wet yet to ride up here in winnipeg. but the bike started right away..

and went around the block and the bike seems great... whoo hooo

cheers
Warts

P.S thanks JD jetting. for the formula!


Buy a lottery ticket:prof:

  • wartsnuff

Posted April 12, 2009 - 06:30 PM

#3

Buy a lottery ticket:prof:


well i am easyier to get right..since i am only 790 feet.

also forgot used the thick o-ring.


cheers
Warts




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.