Clutch Switch


3 replies to this topic
  • yamahacolorado

Posted April 11, 2009 - 03:03 PM

#1

Is thier a clip that is supposed to keep the clutch switch in the perch. Not sure if I'm missing a piece or not.

  • bcs

Posted September 15, 2009 - 05:30 AM

#2

Bump. Anybody?
I got the same question, mine fell out this weekend and when I try to re-insert it in the perch, it seems to be missing some clip to hold it in.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jayh300

Posted September 15, 2009 - 07:30 AM

#3

on my 06 wr the clutch switch appears to be held in with a clip that is made on the switch. The clip goes in a small square hole in the perch.
I have only had it out once, so I am not 100% sure of that...

  • William1

Posted September 15, 2009 - 11:19 AM

#4

on my 06 wr the clutch switch appears to be held in with a clip that is made on the switch. The clip goes in a small square hole in the perch.
I have only had it out once, so I am not 100% sure of that...


Correct, it is a tang on the switch.

I simply cut the switch off, jumped the leads, soldered and shrink wrapped them. I always hold the front brake and clutch when I start a bike so missing the safety device is not a problem for me. I am just saying.....




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.