kouba link

5 replies to this topic
  • HaremScarem

Posted August 15, 2002 - 09:58 PM


Anyone have a extra they want to sell?

  • Bill

Posted August 15, 2002 - 11:23 AM


Do you want to Kouba suspension link or do you want the t-handle for the fuel screw?


  • MN_Kevin

Posted August 15, 2002 - 11:38 AM


He wants a T-Handle.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • HaremScarem

Posted August 15, 2002 - 01:06 PM


Sorry, forgot to say T-Handle..
Been a long day :)

  • michaeltrundle

Posted August 15, 2002 - 05:03 PM


Go to a hobby store and buy a piece of alluminium tube with an OD of 5/16" and an ID of 3/16".
Cut off a piece about 2 inches long, drill a hole through it close to one end and epoxy a piece of brass about 1/2 " long, through the hole to make the"T". Then with a dob of silicone or locktight press the other end over the fuel screw(3/16 is a perfect really tight fit) and you're away. It only costs about $2 for a foot of the tubing and you can make 4 or 5 of them if you snap one off or bend it while messing with the carb.
I could'nt get a hold of a kouba-T over here in australia so I had to improvise. Ended up being cheaper and took about 5 minutes to make.
hope this helps.

  • freestyle111

Posted August 17, 2002 - 07:30 AM


Posted Image


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.