No Clutch Pressure/2001 YZ426F


2 replies to this topic
  • mercury74sno

Posted March 27, 2009 - 01:31 PM

#1

I am hoping someone can help me. I recently took apart my clutch/clutch basket, etc. to put a new shift shaft in. I got the motor back together and now I have no pressure when pulling in the clutch lever? Thanks.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted March 27, 2009 - 01:45 PM

#2

Possibilities:

  • Ball missing between push rods 1 & 2
  • Clutch basket/boss improperly stacked on the mainshaft, so that it is not drawn up far enough.
  • Plates stacked wrong.

Open the clutch cover and start taking it back apart until you find out what's wrong.

  • mercury74sno

Posted March 27, 2009 - 02:22 PM

#3

Gray Racer,
Thanks for the reply. I understand what you all said and I went through a few minutes ago and checked all this. It seems to be right/nothing missing, but I must obviously be doing something wrong.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.