page link to "repack linkage" moved?

4 replies to this topic
  • TTultimate

Posted March 21, 2009 - 01:43 PM


Seems page link is down. Does anyone know where i can find this? Thanks


How to repack swing arm/linkage bearings "

  • clutchless

Posted March 21, 2009 - 02:05 PM


you talking about putting your needle bearings back into their housing or the order to put the bearings back into the linkage?

for packing needle bearings you just keep adding one after another until they are all in place. use grease to hold them in. you have to be patient and expect that some will fall out along the way. just have a clear clear work space and lots of light.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • TTultimate

Posted March 21, 2009 - 03:48 PM


I was actually looking for the dead link ( I am assuming a step by step how to) so i can get my head around the task at hand....

  • grayracer513

Posted March 21, 2009 - 05:08 PM


Looks like a problem at the server itself. Search the technical how-to pages for the info you need. I'll have to investigate the problem.

  • TTultimate

Posted March 22, 2009 - 01:36 PM


found it here: http://www.thumperta...ghlight=linkage

Thank you!

Related Content

WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.