WR450 06 Jetting


No replies to this topic
  • diegox450

Posted March 19, 2009 - 03:52 PM

#1

I ride a WR450 2006, grey wire disconnected, Pro Circuit open muffler (I got it from a local MX racing team) and YZ throttle stop. I didn't remove the airbox snorkel.

The case is, here, in Rio Gallegos, Argentina, it's impossible to buy JD Jetting kits or something similar, and I need a few guidelines on jetting my bike, using OEM parts.

Temps vary from -10°C to 10°C in winter, and 5° to 20° in summer, and elevation is 20' ASL. Humidity is in the low range (Very dry weather)....

Any input would be greatly apreciated!!!

Sorry for the poor english (Again)

EDIT: Got bored yesterday, so removed the snorkel. BTW, I have the AIS installed

Diego




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.