need some help with suspension specs!!


2 replies to this topic
  • frankycottonrow

Posted March 16, 2009 - 03:38 PM

#1

I'm changing seals and have lost manual for my 07 yz450. Does anybody know how much fork oil goes into the inner cartridge and what the torque specs are for the lower bolt and lock nuts. Thanks a lot!!:)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mikedabike

Posted March 16, 2009 - 05:31 PM

#2

The manual lists it at 6.59 oz. The lower bolt, I assume you are talking about the one with the rebound adjuster in it is 21 ft/lb to the locknut and 40 ft/lb when you tighten the assemble to the lower tube.

  • grayracer513

Posted March 16, 2009 - 07:05 PM

#3

Better download a manual:

http://www.yamaha-mo...ice/manuals.jsp

The inner cartridge must be bled totally free of air, so the prescribed amount is added and teh excess forced out by a particular procedure. It's important.

The oil level in the outer chamber is also very important to the feel of the fork when it's done. Read up, and get it right.





Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.