Jetting with the Big Gun

No replies to this topic
  • lavisser

Posted February 19, 2003 - 04:34 PM


Just took delivery of the Big Gun Race Series header and silencer today. I'm putting it on my '99 WR400 with WR timing, grey wire cut, air box lid off, and throttle stop cut. I ride mostly in Florida near sea level in hot weather.

I'm looking for guidance with jetting. In general, do I need to go richer or leaner than stock? From what I've read so far, I'm expecting to modify main jet, needle, and pilot jet as needed. Do I tune one at a time? Which one first, second, etc.?

By the way, my bike runs great now with stock exhaust. Just had to try the Big Gun.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.