426 Carb question


No replies to this topic
  • olschl

Posted March 12, 2009 - 08:05 PM

#1

I have been looking for a rebuild kit for my '02 426 and while looking at the Sudco diagram for the FCR MX39, I noticed part #22, a gasket between the throttle valve and throttle valve plate. Having bought a used bike, and having the carb off half-a-dozen times cleaning out crap, I know my carb is missing this. What are the ramifications of running without this gasket? I am chasing a hanging idle problem and was wondering if this could be the cause, or at least making the issue worse. Any input appreciated.





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 3 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.