Actual measurements of WR/YZ throttle stop

No replies to this topic
  • rwhitlock

Posted February 14, 2001 - 06:18 PM


I measured the '01WR426 throttle stop and the overall length was 33.09mm. I then measured a '01YZ426 throttle stop and its overall length was 23.04mm.

Seems to me the YZ one is 10mm shorter (give or take a few 1/100ths...)

So, if there are some of you out there like me, who don't want to cut up the stop, you can order a YZ throttle stop and it will work fine.

Hope this helps...



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.