titanium spring


29 replies to this topic
  • brokensaw

Posted March 05, 2009 - 06:03 PM

#1

anyone know when 450s got the titanium shock spring

  • mxis4me

Posted March 05, 2009 - 06:23 PM

#2

it was 2006

  • brokensaw

Posted March 05, 2009 - 06:26 PM

#3

thank you

  • LAndrew

Posted March 05, 2009 - 08:01 PM

#4

Has it been a rule that Ti springs are Ti colored and steel ones are painted "colors"??

  • ThumperKid250F

Posted March 05, 2009 - 08:07 PM

#5

anybody no how much i can get for my stock Ti spring from my 2006 with very very low hours on it??

  • spc mike

Posted March 05, 2009 - 08:20 PM

#6

$20.00 shipped to my door.:p

  • Slinkyman16

Posted March 05, 2009 - 11:05 PM

#7

anybody no how much i can get for my stock Ti spring from my 2006 with very very low hours on it??


i just got 80 for mine.. race tech springs are 110.. and most people are on a budget so i sold mine for cheap.. i know its ti and all but who really cares in this type of market..

  • dylans503

Posted March 05, 2009 - 11:09 PM

#8

TI....is it really necessary?

  • grayracer513

Posted March 06, 2009 - 07:24 AM

#9

TI....is it really necessary?

That depends. The Ti spring is 3 pounds lighter than steel.

  • mc1hd

Posted March 06, 2009 - 11:09 AM

#10

Has it been a rule that Ti springs are Ti colored and steel ones are painted "colors"??


No, my 09 450 is suppose to be Ti and as far as I know it is. Only problem is its painted red.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted March 06, 2009 - 02:14 PM

#11

No, my 09 450 is suppose to be Ti and as far as I know it is. Only problem is its painted red.

A magnet will tell you.

  • mavis0826

Posted March 06, 2009 - 02:16 PM

#12

what were the rear spring rates thought the year? The Ti ones.

  • grayracer513

Posted March 06, 2009 - 02:24 PM

#13

The Standard spring rate was 5.5kg/mm '06-'08.

  • LAndrew

Posted March 06, 2009 - 02:33 PM

#14

As a magnet enthusiast I should have known that.........

  • Hallett20

Posted March 06, 2009 - 02:49 PM

#15

Will a spring from an 06'-08' fit an 03'?

  • grayracer513

Posted March 06, 2009 - 03:28 PM

#16

Yes..

  • Hallett20

Posted March 06, 2009 - 04:05 PM

#17

I maybe wrong, but don't the 250's have a "lighter" stock spring than the 450's?

  • grayracer513

Posted March 06, 2009 - 04:39 PM

#18

Much lighter. It's 4.9 Kg/mm

  • mitchicle

Posted March 06, 2009 - 04:55 PM

#19

Has it been a rule that Ti springs are Ti colored and steel ones are painted "colors"??

I don't think so, at least not in my case. 03 yz450 my spring is gray, titanium colored if you will, and i just put a magnet on it and its steel. I'm pretty sure this is the stock spring but i can't be sure as i bought the bike used. Hope this helps

  • wellsy1

Posted March 06, 2009 - 05:34 PM

#20

Gray. Do lighter guys put the 250f springs on there 450f's. If so what would it benifit?





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.