WR450 woodruff key problem admitted by Yamaha?



No replies to this topic
  • mntmayfly

Posted February 17, 2003 - 04:07 PM

#1

Newbie Here!! just trying to help!
i found this post on offroad.com, may be true? i have been following the posts on thumpertalk the past couple of weeks, and was doing some research and found this?
Talked to Yamaha today... They don't know for sure but they think what
happened was a "pinch" in the airline on the tool used to assemble that
particular piece. Also a dealer I talked with today that has fixed 4 of
these said a bike right out of the crate had 14 foot pounds on the nut and
it should be 50. After the replacement and re-torque there have been to
further failures.

Mike Hobbs
http://moab.off-road...mbox/wr450.mbox
heres the link where i got it from.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.