2003 Yz250F T-4 on 2008 Yz450F?

No replies to this topic

Posted February 26, 2009 - 05:12 PM


I have a T-4 from a 2003 Yz250f and I was wondering if there is any harm trying to mount it on my 2008 Yz450f. The stock 08 pipe fits over the header and gets clamped tight. The T-4 fits inside of my 08 header but the fit is VERY tight. There is a slight gap where a tiny bit of exhaust escapes. If I seal the gap and no exhaust can escape is it still a bad idea to keep the pipe on there? Will the smaller diameter pipe do any harm or could this hurt my engine in any way?

Related Content


Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On Yesterday, 06:20 PM

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.