footpeg lowering

2 replies to this topic
  • bluebreadtruck

Posted February 24, 2009 - 02:01 PM


I would like to lower my foot they make a kit?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted February 24, 2009 - 02:14 PM


I would like to lower my foot they make a kit?

Yes they do. Fastway lowboy foot pegs are a 1/2 inch lower. Since your foot peg pins are at a diagonal the Fastway pegs will drop down and back a little...great for big feet. I had to remove and bend my brake lever down also.

The Fast Way pegs are sold here on TT, cheapest price around also.

  • maxwr400f

Posted March 11, 2009 - 08:43 AM


on my 400 i did so:
take off the foot pegs and cut the cilinder where works the spring.
weld it in the opposit side.
after put the left spring on the right side and same for other one.



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.