2003 YZ450 forks fit 2005 WR450???


3 replies to this topic
  • luckydog50

Posted February 18, 2009 - 05:43 AM

#1

My son decided to play chicken with a Ford F-250 in a fun fast wash last year.
Needless to say two broken ribs and a tweaked front fork later we found a complete front suspension from a 2003 YZ and would like any info on bolting the whole front assembly to his 2005 WR. I did a quick search on this forum and didn't see anything specific.

Thanks,

Luckydog50

  • DrzDasher

Posted February 18, 2009 - 06:22 AM

#2

2005 is when they went to a 48mm fork on the wr , the 03 yz still has the 46mm, if you can find some off of an 04 then you are set
it is still possible, but not a direct bolt on. you will need new triple clamps, possible brake caliper and other misc. stuff.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • luckydog50

Posted February 18, 2009 - 06:51 AM

#3

Thanks, DrzDasher, thought we were getting to lucky with that set up. We will keep searching Ye Ol' internet for a cost effective fix.

  • Just_a_trail_rider

Posted February 18, 2009 - 08:45 AM

#4

If you have the upper and lower triple clamps, it will bolt right up.

be forwarned, the yz suspension will be very harsh and rough. You will need to get it redone.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.