Wheel dish or offset for 07 wr450


2 replies to this topic
  • coloradobrad

Posted February 11, 2009 - 05:33 PM

#1

I de-laced both of my wheels and forgot to check if there was any dish or offset between the edge of the hubs and the lip of the rim. The manual says 2mm of lateral & radial run-out allowed but doesn't talk about dish or offset.

Are the hubs simply centered in the rims? Would somebody please make some measurements from your bike to determine if there's any rim to hub offset (both front and rear)

I gotta get these wheels laced\trued so I can try out my new suspension :lol:

Thanks!
Brad

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PBDBLUE

Posted February 11, 2009 - 05:53 PM

#2

There is no offset. The rim is centered on the hub between the spoke flanges.

  • coloradobrad

Posted February 12, 2009 - 08:12 AM

#3

There is no offset. The rim is centered on the hub between the spoke flanges.


Thanks!




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.