UEGO sensor for jetting?

1 reply to this topic
  • av

Posted February 11, 2003 - 08:57 AM


What do guys think of this idea?

Has anyone tried this? Please post results...

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • qadsan

Posted February 11, 2003 - 10:28 AM


Depending on how its done, it could be helpful, but I think that properly reading your spark plug will give you a more accurate reading of the combustion process and I don't mean just looking at plug color since that can be misleading, especially with todays fuels.

The air/fuel requirements will be different between a bike being tested in your garage and when the engine is under a load while riding. If you're going to use an Oxygen sensor, then I'd suggest using a wideband oxygen sensor and properly locating it in the header section. I'd also recommend datalogging the output so that you can ride freely and review the results later. Another idea would be to impliment a throttle position sensor and have both the O2 and TPS sensors datalogged together to give you a better idea of the relationship between throttle position and mixture.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.