exhaust guard washers

2 replies to this topic
  • tarmac_terrorist

Posted February 10, 2009 - 08:52 AM



I removed the exhaust guard to clean the manifold. There are three screws which hold the exhaust guard in place. Behind each screw (backside of guard) a washer fits. There appears to be 4 washers. Im guessing two washers sit on one screw. But which screw? I've currently got two washers on the front screw/ nearest the front tyre. Is that right?

Does anyone know the specs/measurements of the rubber radiator coolant pipes that sit on the right side of the bike? Is a 'samco' style kit available?


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • matt4x4

Posted February 10, 2009 - 11:02 AM


You are supposed to have 6 flat ones and 3 locking washers...
Bolt, lock washer, washer, guard, washer (x3)

Aftermarket rad hoses:

  • tarmac_terrorist

Posted February 10, 2009 - 11:50 AM


&%$#@! it. This is what came off the bike.

screw>washer>guard>washer. total PITA.

One washer left over.

Thanks again matt. Two queries and you have helped twice. Thanks man.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.