Starter bearing in flywheel

2 replies to this topic
  • hillclimbguy

Posted February 08, 2009 - 08:56 PM


Has anybody replaced starter bearing in flywheel? Going to attempt this week.
Starter wont engage. Found rollers to be worn.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted February 09, 2009 - 06:52 PM


I think you're referring to the starter clutch. You'll need a puller to take the flywheel off. Then just remove the 6 bolts holding the clutch on. Clean everything up and use loctite when you put the new one on.

  • hillclimbguy

Posted February 09, 2009 - 08:27 PM


Thanks for the reply. I have the puller. Just didnt know about the starter clutch.
Again thank you.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.