Top End Rebuild
Posted February 05, 2009 - 10:21 PM
Thanks for any help/suggestions/links in advance...
Posted February 06, 2009 - 04:40 AM
Keep in mind that a top end shouldn't cost you $100. You only need to get new rings, the piston is rarely damaged. If you have a hone you don't even need a cylinder. If you want, you can pick up a set of rings here and a cylinder if you need it.
Posted February 06, 2009 - 08:49 AM
These are Two Bros. website directions I used when I did my sons 88cc kit and helped big time only thing that might not be the same is the alignment of the rings but I had the layout for my rings but this is a good information guide if it helps
Posted February 07, 2009 - 12:23 PM