wr426


7 replies to this topic
  • bobrider

Posted February 01, 2009 - 09:01 PM

#1

looking at a wr426...how do these bike rate and is there any year better than another...its old (2000) but looks to be in good shape....is there a big difference in the 426-450...and are they relieable...coming off an xr400 so that was never an issue

  • Sierra_rider

Posted February 01, 2009 - 09:15 PM

#2

I'd make sure that the motor is in good shape. It would be alot of $$$ to do a rebuild. One of the big differences between a 450 and 426 is that the 426 doesn't have electric start.They were pretty good bikes though.

  • dustdogg

Posted February 01, 2009 - 09:17 PM

#3

The WR 426 was only made in 01' & 02'. If it is really a 2000 model than it is a WR 400 or it could be the YZ model which was a 426 a year earlier than the WR. Whatever year it is they are proven to be very reliable. Mine is an 02' model and I have not done anything to the motor other than oil/filter changes and occasionally checking the valves. Look it over closely and if the price is right go for it. I have riden several XR400 and think they are great bikes bike I promise you that you will enjoy they upgraded suspension and snappier performance of the WR 400/426.

  • bobrider

Posted February 01, 2009 - 09:21 PM

#4

asking 1500...2001 my bad....are they as loud as the new fuor strokes....valve clatter or whatever that noise.is...sounds like they are going to blow (new crfs)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • maxtherat

Posted February 01, 2009 - 09:24 PM

#5

They are very reliable considering the more modern engine design( comparred to the XR) I think that 2000 was still a 400 but cant say for sure. I know a 2000 YZ was a 426. 03 was first year for 450 with auto decompression, e- start, & aluminum sub frame. 03 had some e-start problems but most have been fixed by now. All great bikes though and easy to do power upgrades.

  • R_Little

Posted February 04, 2009 - 01:54 PM

#6

They are very reliable considering the more modern engine design( comparred to the XR) I think that 2000 was still a 400 but cant say for sure. I know a 2000 YZ was a 426. 03 was first year for 450 with auto decompression, e- start, & aluminum sub frame. 03 had some e-start problems but most have been fixed by now. All great bikes though and easy to do power upgrades.


correct...2001 1st year for the Wr426.....they are super reliable and will outlive 3 CRF450's. the early Wr's are a bit overengineered which makes them a little heavy but they are reliable and powerful.

tons of parts on ebay if you need any and you most likely wont.

  • 07thommi

Posted February 04, 2009 - 01:58 PM

#7

My dad has an 02 WR426 and that bike is awesome! He bought an 06 YZ450 but couldnt bring himself to sell the WR so he still has it and uses it as his backup bike. It has good power and good suspension, but is a little heavy and the weight is up kinda high, but when you get use to it you dont notice the extra weight until you ride a YZ. We have never had a problem with the bike and have never had to adjust the valves and we do not ride easy. We are hard on our equipment, but we keep up on all of the regular maintinence and have never had a problem.

-mt-

  • CAlmride

Posted February 05, 2009 - 06:19 PM

#8

I have a 01 WR426 that I bought new. I've reworked the suspension for my weight, rejetted it, done all the free MODs and dual sported it. It's been a great bike that usually starts on the 1st kick. Changed the oil and filter religiously. I've checked the valves but it's never needed shimming. It's been a great bike.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.