O2 (oxygen) sensor for jetting?



3 replies to this topic
  • av

Posted February 07, 2003 - 11:58 AM

#1

Any mechanics can help out with this thread? txthumper are you reading?

  • sabin

Posted February 08, 2003 - 03:50 AM

#2

Here is some info:

web page

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ddialogue

Posted February 08, 2003 - 08:15 AM

#3

Instead of an O2 sensor, how about a EGT sensor such as this one? Don't know much about this subject but am very interested in giving it a try.

EGT sensor

  • heydude

Posted February 08, 2003 - 10:52 PM

#4

tuning motorcycles with AF monitors is a complete waste of time. The cams in bikes are much bigger then the cams in cars that the 02 sensors were desined for. The big cams allow unburned air - O2 rich - to go right outa the intake valves and out the exhaust valves. When both valves are opened its called exhaust overlap, and bikes have much more then cars to increase the high end power. Even in a perfect burn, the air from the cam overlap would cause the sensor to detect some oxygen.
Hope this helps alittle.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.