PWR radiators


3 replies to this topic
  • texas_hippie

Posted January 23, 2009 - 05:21 PM

#1

Ok guys, are any of you using the PWR aftermarket radiators on you WR's?
I'm riding an 06, and wondering about fitment, quality, ect. Any thoughts on the matter would be apreciated.

  • tarry

Posted January 24, 2009 - 06:34 AM

#2

I had them on my 06 wr 450. They were a tight fit, but worked great. If you crunch the stock ones, they are the way to go when replacing them!:banana:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • texas_hippie

Posted January 24, 2009 - 06:39 AM

#3

Thanks for the reply, Tarry. Did you install any type of radiator guards on them? I'm just wondering which brands would fit, seeing as the sizes are a bit larger than OEM.

  • texas_hippie

Posted February 01, 2009 - 01:14 PM

#4

I had them on my 06 wr 450. They were a tight fit, but worked great. If you crunch the stock ones, they are the way to go when replacing them!:)

Got the PWR rads put on yesterday. The stock plastic guards no longer fit. They're about a quarter inch short, width wise. As far as installation, the radiators fit, but only because of the generous amounts of rubber in the isolation grommets. I'm still wondering if the Flatlander rad guards are gonna fit. Anyone know?:lol:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.