Rear Fender Bracing?

2 replies to this topic
  • mazzuca21366

Posted January 09, 2009 - 08:43 PM


I am installing a dual sport kit on my 2008YZ450F. Will the rear fender support the tail light and tag holder assembly. I am using the UFO tail and turn signal assembly. I will not be riding the bike on an mx track. Just street and fire roads. I am concerned it will shake considerably when the bike is running. Should I fab an inner fender brace under the plastic, or can I purchase a different rear fender to support the extra weight?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • honda907

Posted January 10, 2009 - 05:29 AM


I just pmed you. Yah, don't jump the bike (with the BAJA kit anyhow) because I broke about 4 turn signals. The lenses broke(the amber ones anyhow,not LED) and then the light would come off the stalk. This was over a tripple on my CRF450 wtih a little dirt/mud attached to the rear fender. Of course, I still practiced on it like it was my mototcross bike! Other than that , they hold up ok. Don't be concerned about the bobbing of the rear fender. It is ok.

  • mazzuca21366

Posted January 11, 2009 - 06:32 AM


Thanks for the input. Come to think of it my Drz 400sm rear fender shook the edge tag a tail pretty good.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.