brake light problem? i think ?


1 reply to this topic
  • steviet

Posted December 14, 2008 - 03:24 PM

#1

ive got a 2004 wr250f . the footbrake lights the back brake light up but not the front brake. is this normal. cheers guys, steve

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • doctorchopper

Posted December 15, 2008 - 10:09 AM

#2

It all depends on if you have a pressure sensor fitted on the front brake line. WR's never came standard with pressure sensors are switches for the rear light,but they did come pre wired with a dual fillament bulb, have a look by your front master cylinder where the brake line is attatched, if it's just brake line then banjo fitting then it doesnt have a pressure sensor but if there is a small in line sensor with wires coming out then it's there but not working




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.