Jetting w/ White Bros. header?

3 replies to this topic
  • Mike Martel

Posted December 01, 2008 - 01:49 PM


would a white brothers slip on and stock header make enough difference to need to rejet. I ride at sea level in florida. all other engine parts are stock and it is jetted how it came from the factory. it pops on decel and has a bad bog if you stab it real quick to cross a log or creek.

  • grayracer513

Posted December 01, 2008 - 01:57 PM


The header wouldn't cause this. If the '06 is still running the jetting it came from the factory with, the pilot will be quite lean at sea level. See the jetting sticky to see what others run. I use a 45/165.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Mike Martel

Posted December 04, 2008 - 12:54 PM


can any one recomend a good jet kit to buy?

  • Mike Martel

Posted December 04, 2008 - 12:57 PM


What do you use to seal the joint between the header and the silencer with? could this be the problem with the decel popping?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.