2004 yz450f carburetor How do you remove needle valve seat


5 replies to this topic
  • DavidAchziger

Posted November 30, 2008 - 09:17 PM

#1

I am wondering how to remove the needle valve and needle valve seat of carburetor I am trying to remove the needle valve seat it has grooves in it this is the little brass oval that the float needle valve sits in. I do not know how to remove The seat I dont want to force it out so if any one knows how to do this please let me know. thank you

  • grayracer513

Posted November 30, 2008 - 09:53 PM

#2

There is a small Phillips screw next to the seat that hols ti down by clamping the edge to the carb body. It will be tight so use a screwdriver in good condition that fits properly.

Download a manual:

http://www.yamaha-mo...ice/manuals.jsp

  • SXP

Posted December 01, 2008 - 06:40 AM

#3

There is a small Phillips screw next to the seat that hols ti down by clamping the edge to the carb body. It will be tight so use a screwdriver in good condition that fits properly.

Download a manual:

http://www.yamaha-mo...ice/manuals.jsp


Gray - That changed with the 03 and up carb. The seat is now (permanently ?) pressed into the carb body, and for the life of me I could not figure out a way to get it out. A piss-poor design in my opinion:bonk:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted December 01, 2008 - 07:25 AM

#4

Gray - That changed with the 03 and up carb. The seat is now (permanently ?) pressed into the carb body, and for the life of me I could not figure out a way to get it out. A piss-poor design in my opinion:bonk:

Isn't that intriguing? I just looked at the parts book, and it no longer lists the seat as a serviced part. I guess they don't go bad anymore. The needle is till listed, but by itself.

  • DavidAchziger

Posted December 01, 2008 - 08:11 AM

#5

it says in the book if needle valve seat is worn replace it do you have to buy new carb or have it pressed out

  • grayracer513

Posted December 01, 2008 - 08:51 AM

#6

Text like that is quite often carried over from earlier manuals. It would seem that Keihin no longer sees the need to replace the seat.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.