changing wr timing

2 replies to this topic
  • Bambislayer

Posted January 21, 2003 - 05:19 PM


how hard is it to change a wr to yz timing and how does the change improve performance?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jeff_eugene_or

Posted January 21, 2003 - 05:48 PM


It takes about one hour and is pretty easy. Make sure you have clear instructions on how to do it. I got mine from Baja Designs. The throttle response was better and it eliminated the hesitation from off-idle. A very worth while job.

  • Dodger

Posted January 21, 2003 - 05:59 PM


Very worth while!! Just make sure you've got access to a good torque wrench, make all the difference when re-torqueing the camb bolts. It was literely the difference between valves within spec, vs. too loose/tight.

Dodger :D :)


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.