YZ ignition on a wr?

2 replies to this topic
  • Thermos O flask

Posted November 09, 2008 - 01:51 AM


Has anyone got a yz ignition to work on a wr?
I put a yz 426 ignition on a "00wr400 all the wires are the same colour and the two big connectors are the same,the wr ignition has a grey wire but its not connected or wired into the loom on the aussie bikes.just cut and soldered the wr connector to the yz box BUT no spark. Any ideas

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • godhappan

Posted November 14, 2008 - 12:45 PM


are you sure it had spark before? (the yz box)

  • Thermos O flask

Posted November 14, 2008 - 04:47 PM


That's the other problem...i don't have a yz to test it on.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.