YZ Desert Tank + Unabiker Rad Guards (07+)

2 replies to this topic
  • 123BigcoopDawg576

Posted November 08, 2008 - 04:59 PM


For those of you with an 07+ WR and an IMS tank and Unabiker Rad guards, how are you fastening the lower part of the shroud to the radiator/guard? Mine is a good inch an half apart...any pictures or help would be great.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tribalbc

Posted November 08, 2008 - 05:57 PM


Like you say about 1.5" spacer and bolt to match. I just used a suitable piece of aluminum from a hardware store. It's for joining cables together. It works :worthy:
Not the closet pic, all I have right now but you get the idea.

Posted Image


Posted November 09, 2008 - 10:48 AM


I found some nylon spacer material at the hardware store that I could cut to length... not quite 1.5" more like an inch for me...

Good luck:ride:


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.