brake pressure switch


4 replies to this topic
  • tammie

Posted November 02, 2008 - 05:42 PM

#1

hey guys is this the brake pressure switch i need for my 99 yz400f i have the elextrex lighting coil and head light already installed i had just a regular tail light but i am making it street legal and ive got a tail/brake like to install just want to make sure i get the right pressure switch. I was thinking of just installing on the rear brake or should i put on the front considering you use front more?

this is the one i was looking at is this right https://www.bajadesi...c Brake, Nissin

  • 1rkcooper

Posted November 02, 2008 - 06:11 PM

#2

That will work but have you tried your local shops, it may be cheaper than ordering and paying shipping. I can't remember what mine cost.
If you need to have the bike inspected you will probably need a switch on both the front and the rear brake depending on the laws in Ontario.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tnl

Posted November 02, 2008 - 08:48 PM

#3

I have one like that and I think I payed about $20 for it locally. As stated above, check on your local law regarding the front brake too.

  • tammie

Posted November 03, 2008 - 06:04 AM

#4

thanx i'll check actually my bike is already blue plated so i won't have to get it inspected......

  • ztangoKLX

Posted November 06, 2008 - 05:43 PM

#5

Call Eric at Vicious Cycle in New Dundee - I believe he has K&S pressure switches in stock.





Related Content

Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.