JD Kit and 2.75mm


3 replies to this topic
  • motoscotty

Posted October 22, 2008 - 07:51 PM

#1

JD recomends 2.75mm between the linkage and the the black plastic on the ac pump linkage for tuning the pump.Has anyone ever tried or used this.I would always back it off til there is no play and go 1/2 turn past that.The 2.75 is way past that half turn.I will report back with my test results.This is on a 08 450.

  • William1

Posted October 23, 2008 - 02:37 AM

#2

I only use numbers like this as a starting point. I set the AP by visually confirming the squirt just misses the slide.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • timoyz1

Posted October 23, 2008 - 06:30 AM

#3

I only use numbers like this as a starting point. I set the AP by visually confirming the squirt just misses the slide.


Ditto. While sub-frame and shock is off, it is really easy to visually check.

  • Charles De Mar

Posted October 23, 2008 - 06:35 AM

#4

When I bought my Quickshot2 they had a spacer provided to set mine. Mine just misses the slide too:thumbsup:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.