No Spark! Help!

4 replies to this topic
  • fmf-wr

Posted June 20, 2002 - 08:15 AM


I've got a 2001 wr400 i've just done the cam chain and piston and rings put it back together and it will not spark all the wiring seems fine. Any idears

  • Hick

Posted June 20, 2002 - 08:32 AM


Do you mean it won't start, or that there is no observable spark at the plug??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • lewichris

Posted June 20, 2002 - 09:00 PM


make sure the coil is getting a good ground on the fraim and make sure the coil wire that is going into the plug connector is connected to the actual plug connector. it can come loose. and if you are dual sported make sure your switch is on.


Posted June 21, 2002 - 02:16 AM




Bonzai :)

  • lewichris

Posted June 21, 2002 - 04:27 AM


lol. I really need to go back to high school


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.